Here’s a quick guide to configuring the iRig Blueboard wireless MIDI controller with a Mission SP-1 switching expression pedal.
We had a request recently via the Mission Customer Service queue about using the iRig Blueboard with a Mission SP-1. The Blueboard is a handy little battery operated MIDI controller that can send MIDI Program Change and Continuous Controller messages via Bluetooth wireless to a desktop computer, smartphone or tablet. I actually use one of these myself at home where I run Scuffham S-Gear on my Apple iMac connected via USB to a Mission Gemini 1 full range amplified cabinet and use the Blueboard to change S-Gear presets.
The Blueboard has two expression pedal inputs and the customer wanted to know if they could connect the a Mission SP-1 switching expression pedal to these. The SP-1 is an expression pedal that has a switch integrated into it. When used with a compatible MIDI controller, the switch can be used to send MIDI messages to turn effects on and off. Typical uses would be to turn an expression pedal controlled effect such as wah or whammy on and off, or to use the expression pedal as a volume and have the switch turn on a boost or distortion effect.
It turns out the Blueboard works great with the SP-1. I tested this with the Blueboard iPhone app, but have no reason to believe software on other systems should not work just the same. Since the Blueboard is only intended to have continuous controllers connected to the pedal inputs, there is a little workaround that has to be done on the calibration, after which it should work just fine.
Connect the pedal out on the SP-1 to the first input on the Blueboard with a TRS cable and run the Blueboard pedal calibration utility. Then connect the pedal out on the SP-1 to the second pedal input on the Blueboard and run the calibration utility again. After calibration is complete, you can connect both the pedal and the switch outputs on the SP-1 with two TRS cables to the two pedal inputs on the Blueboard and both continuous and switch functions will work. For applications where a switch is not required, the Mission EP-1 is an appropriate alternative.
Since the Blueboard only has 4 switches to start with, having an extra one is pretty handy, and being mounted on the expression pedal, it’s perfect for turning your wah on.
Hi,
Just a quick question, Im using a blueboard which connects to amplitube app on ipad, and am looking for an expression pedal that can firstly, control volume when the switch is off and when switched on, controls a wah fx in amplitube, just like a conventional multi effects with a pedal (eg boss gt100) . Can i set the Mission sp 1 for this or do i need to use two separate pedals. Any advice would be much appreciated.
Thank you
Shah
the blueboard is sending MIDI CC messages to the app on the ipad indicating the pedal and switch positions. You would have to figure out if the amplitube app has settings that would allow it to do what you wanted with the MIDI messages. This is more a question for someone with amplitude setup knowledge. I don’t have much experience of this app.
Are there any rechargeables that this can be powered by? non-rechargeables are a deal-breaker for me.
The Blueboard uses 4 x AAA batteries. There are various rechargeable AAA’s available. I use these https://www.amazon.com/Blackube-Rechargeable-Batteries-Charging-Quick-Charge/dp/B07MWYYDTM/ref=pd_lpo_sbs_23_t_0/130-0984292-2961743?_encoding=UTF8&psc=1&refRID=7P3MF55EPWATJW74WAXX
Where is this Blueboard calibration utility? I’ve not been able to find it.
https://apps.apple.com/us/app/irig-blueboard/id718233714?mt=8&ign-mpt=uo%3D4
I was using rechargeable ni-mh batteries. I notice the manual says only use non rechargeable. Think ni-mh produce a lower voltage. Could this usage damage the pedal? After 6 months of using the Blueboard, no longer the a or c buttons work when trying to connect To app. I am stuck in Mode 1, B.
I was using rechargeable ni-mh batteries. I notice the manual says only use non rechargeable. Think ni-mh produce a lower voltage. Could this usage damage the pedal? After 6 months of using the Blueboard, no longer the a or c buttons work when trying to connect To app. I am stuck in Mode 1, B.
The firmware can be still updated…
This is an interesting option if you will normally have AC Power. I tried and it worked. It’s 4 AAA sized battery replacements that connect to a power adapter. 🙂
https://www.amazon.com/Lenink-Battery-Supply-Adapter-Replace/dp/B08747NGR2/ref=pd_sbs_328_4/142-0221437-0405728?_encoding=UTF8&pd_rd_i=B08747NGR2&pd_rd_r=cf1791db-e612-40c5-b32c-525e76c4b7c8&pd_rd_w=De0QI&pd_rd_wg=Kyr3Z&pf_rd_p=ed1e2146-ecfe-435e-b3b5-d79fa072fd58&pf_rd_r=M9HTY7N7A8ZGPWVAQ2M5&psc=1&refRID=M9HTY7N7A8ZGPWVAQ2M5
How cool! Thank you for sharing this interesting find, Vincent!
Very good post of this pedal